防爆监控方案
防爆摄像机供应商
解决方案
世国案例
防爆监控案例

International Sales

Duke Tian

Tel:+86-18025850727
E-mail:   duke@shiguo.org



E-mail: shiguosales@shiguo.org


 

 

Current LocationHome> News> Knowledge CenterKnowledge Center

How to install the explosion proof camera

Date:2012-12-22

 

Step 1: Take out support, ready to tools and parts: get a plug, small screws, screwdriver, hammer, electric drill and other necessary tools; According to the installation of a pre-determined position, check up plug and the size of the tapping screw type, try a bracket screws and explosion-proof camera base screw whether appropriate, embedded pipeline interface is good processing, testing the cable was clear, in place into the installation program.

Step 2: Take out explosion-proof camera, according to the pre-determined explosion proof camera models and specifications, carefully mount lens (infrared one-piece explosion proof camera does not need to install the lens), be careful not to use hand to touch the lens and CCD confirmed after fixed firmly, connected to the power supply, connected hosts or field use monitor, a small TV, etc adjust lighting and distance.

Step 3: Take out the bracket, up, small screws, screwdriver, hammer, electric drill tools such as, according to the pre-determined position, good support. After check solid, fit on explosion proof camera (the direction in accordance with the contract);

Step 4: If you need to install the shield, after the second step, directly from here to install shield.

1) Open the cover plate, and the tailgate;

2) Take out fixed metal, to fasten on explosion-proof camera;

3) Put power adapter into inside the shield;

Reset on the cover board and the backboard, straighten out the cable, fixed, loaded on the scaffold.

Step 5: The BNC plugs welded video cable insert video cables socket inside, confirm the fixed tightly.

Step 6: The output power plug of the ac adapter insert monitor explosion proof camera of the power socket, and confirm the fixed tightly.

Step 7: Take the other side of the cable access control host or monitor (television set), to ensure the fixed tightly.

Step 8: Through monitoring host and explosion proof camera power supply, through adjust the Angle of explosion proof camera monitors to the predetermined range.

Feedback|Help |Contact us|Map |Legal Notice |Privacy Protection           All Rights Reserved©Shenzhen shiguo Technology Co., Ltd.1999-2012 粤ICP备11006992号-3